2018-01-22  Maciej W. Rozycki  <macro@mips.com>

	* MAINTAINERS: Update my company e-mail address.

2017-01-12  Tom Tromey  <tom@tromey.com>
	    Sergio Durigan Junior  <sergiodj@redhat.com>

	* Makefile.in (install-only): Install gdb-add-index.

2018-01-12  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-tdep.c (KVE_PROTECTION): Correct value.

2018-01-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* infrun.c (keep_going_pass_signal): Clear step-over info when
	insert_breakpoints fails.

2018-01-11  Pedro Alves  <palves@redhat.com>

	PR gdb/22583
	* infrun.c (resume): Rename to ...
	(resume_1): ... this.
	(resume): Reimplement as wrapper around resume_1.

2018-01-11  Pedro Alves  <palves@redhat.com>

	PR remote/22597
	* remote.c (remote_parse_stop_reply): Default to the last-set
	general thread instead of to 'magic_null_ptid'.

2018-01-10  Pedro Alves  <palves@redhat.com>

	* language.h (language_get_symbol_name_matcher): Rename ...
	(get_symbol_name_matcher): ... this.
	* language.c (language_get_symbol_name_matcher): Ditto.
	* dictionary.c, linespec.c, minsyms.c, psymtab.c, symtab.c: All
	callers adjusted.

2018-01-10  Pedro Alves  <palves@redhat.com>

	PR gdb/22670
	* dwarf2read.c
	(gdb_index_symbol_name_matcher::gdb_index_symbol_name_matcher):
	Adjust to use language_get_symbol_name_matcher instead of
	language_defn::la_get_symbol_name_matcher.
	* language.c (language_get_symbol_name_matcher): If in Ada mode
	and the lookup name is a verbatim match, return Ada's matcher.
	* language.h (language_get_symbol_name_matcher): Adjust comment.
	(ada_lookup_name_info::verbatim_p):: New method.

2018-01-10  Pedro Alves  <palves@redhat.com>

	PR gdb/22670
	* ada-lang.c (ada_collect_symbol_completion_matches): If the
	minsym's language is language_auto or language_cplus, pass down
	language_ada instead.
	* symtab.c (compare_symbol_name): Don't frob symbol language here.

2018-01-10  Pedro Alves  <palves@redhat.com>

	PR gdb/22670
	* minsyms.c (linkage_name_str): New function.
	(iterate_over_minimal_symbols): Use it.

2018-01-09  John Baldwin  <jhb@FreeBSD.org>

	* NEWS: Document that 'info proc' now works on FreeBSD.

2018-01-09  John Baldwin  <jhb@FreeBSD.org>

	* configure.ac: Check for kinfo_getfile in libutil.
	* configure: Regenerate.
	* config.in: Regenerate.
	* fbsd-nat.c: Include "fbsd-tdep.h".
	(fbsd_fetch_cmdline): New.
	(fbsd_fetch_kinfo_proc): Move earlier and change to return a bool
	rather than calling error.
	(fbsd_info_proc): New.
	(fbsd_thread_name): Report error if fbsd_fetch_kinfo_proc fails.
	(fbsd_wait): Report warning if fbsd_fetch_kinfo_proc fails.
	(fbsd_nat_add_target): Set "to_info_proc" to "fbsd_info_proc".

2018-01-09  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-nat.c (struct free_deleter): Remove.
	(fbsd_find_memory_regions): Use gdb::unique_xmalloc_ptr<>.

2018-01-09  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-nat.c (fbsd_pid_to_exec_file) [KERN_PROC_PATHNAME]: Return
	NULL for an empty pathname.

2018-01-09  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-tdep.c (KVE_STRUCTSIZE, KVE_START, KVE_END, KVE_OFFSET)
	(KVE_FLAGS, KVE_PROTECTION, KVE_PATH, KINFO_VME_PROT_READ)
	(KINFO_VME_PROT_WRITE, KINFO_VME_PROT_EXEC, KINFO_VME_FLAG_COW)
	(KINFO_VME_FLAG_NEEDS_COPY, KINFO_VME_FLAG_NOCOREDUMP)
	(KINFO_VME_FLAG_SUPER, KINFO_VME_FLAG_GROWS_UP)
	(KINFO_VME_FLAG_GROWS_DOWN, KF_STRUCTSIZE, KF_TYPE, KF_FD)
	(KF_PATH, KINFO_FILE_TYPE_VNODE, KINFO_FILE_FD_TYPE_CWD)
	(KINFO_FILE_FD_TYPE_TEXT, SIG_WORDS, struct kinfo_proc_layout)
	(kinfo_proc_layout_32, kinfo_proc_layout_i386)
	(kinfo_proc_layout_64, fbsd_vm_map_entry_flags)
	(fbsd_core_info_proc_mappings, fbsd_core_vnode_path)
	(fbsd_core_fetch_timeval, fbsd_print_sigset)
	(fbsd_core_info_proc_status, fbsd_core_info_proc): New.
	(fbsd_init_abi):  Install gdbarch "core_info_proc" method.
	* fbsd-tdep.h (fbsd_vm_map_entry_flags): New.

2018-01-08  Samuel Thibault  <samuel.thibault@ens-lyon.org>

	* gdb/gnu-nat.c: Include <elf.h> and <link.h>.
	(gnu_xfer_auxv): New function.
	(gnu_xfer_partial): Call gnu_xfer_auxv when `object' is
	TARGET_OBJECT_AUXV.

2018-01-08  Yao Qi  <yao.qi@linaro.org>
	    Simon Marchi  <simon.marchi@ericsson.com>

	* Makefile.in (COMMON_SFILES): Remove selftest-arch.c and
	common/selftest.c.
	(COMMON_OBS): Remove selftest.o.
	* configure.ac: Append selftest-arch.c and common/selftest.c to
	CONFIG_SRCS.  Append selftest-arch.o and selftest.o to COMMON_OBS.
	* configure: Re-generated.
	* maint.c (maintenance_selftest): Wrap selftests::run_tests with
	GDB_SELF_TEST.
	(maintenance_info_selftests): Likewise.

2018-01-08  Xavier Roirand  <roirand@adacore.com>

	* ada-valprint.c (val_print_packed_array_elements): Use
	proper number of elements when printing an array indexed
	by an enumeration type.

2018-01-07  Simon Marchi  <simon.marchi@polymtl.ca>

	* dwarf2read.c (struct dwarf2_cu) <dwarf2_per_objfile>: Remove.
	(dw2_get_file_names_reader): Adjust.
	(lookup_dwo_signatured_type): Adjust.
	(lookup_dwp_signatured_type): Adjust.
	(lookup_signatured_type): Adjust.
	(create_type_unit_group): Adjust.
	(get_type_unit_group): Adjust.
	(process_psymtab_comp_unit_reader): Adjust.
	(build_type_psymtabs_reader): Adjust.
	(scan_partial_symbols): Adjust.
	(add_partial_symbol): Adjust.
	(add_partial_subprogram): Adjust.
	(peek_die_abbrev): Adjust.
	(fixup_go_packaging): Adjust.
	(process_imported_unit_die): Adjust.
	(dwarf2_compute_name): Adjust.
	(dwarf2_physname): Adjust.
	(read_import_statement): Adjust.
	(handle_DW_AT_stmt_list): Adjust.
	(read_file_scope): Adjust.
	(read_func_scope): Adjust.
	(read_lexical_block_scope): Adjust.
	(read_call_site_scope): Adjust.
	(read_variable): Adjust.
	(dwarf2_rnglists_process): Adjust.
	(dwarf2_ranges_process): Adjust.
	(dwarf2_ranges_read): Adjust.
	(dwarf2_get_pc_bounds): Adjust.
	(dwarf2_record_block_ranges): Adjust.
	(dwarf2_add_field): Adjust.
	(dwarf2_add_member_fn): Adjust.
	(read_structure_type): Adjust.
	(process_structure_scope): Adjust.
	(read_enumeration_type): Adjust.
	(read_array_type): Adjust.
	(mark_common_block_symbol_computed): Adjust.
	(read_common_block): Adjust.
	(read_namespace_type): Adjust.
	(read_namespace): Adjust.
	(read_module_type): Adjust.
	(read_tag_pointer_type): Adjust.
	(read_tag_ptr_to_member_type): Adjust.
	(read_tag_string_type): Adjust.
	(read_subroutine_type): Adjust.
	(read_typedef): Adjust.
	(read_base_type): Adjust.
	(attr_to_dynamic_prop): Adjust.
	(read_subrange_type): Adjust.
	(read_unspecified_type): Adjust.
	(dwarf2_read_abbrevs): Adjust.
	(load_partial_dies): Adjust.
	(read_partial_die): Adjust.
	(find_partial_die): Adjust.
	(guess_partial_die_structure_name): Adjust.
	(fixup_partial_die): Adjust.
	(read_attribute_value): Adjust.
	(read_addr_index): Adjust.
	(read_addr_index_from_leb128): Adjust.
	(read_str_index): Adjust.
	(dwarf2_string_attr): Adjust.
	(get_debug_line_section): Adjust.
	(dwarf_decode_line_header): Adjust.
	(lnp_state_machine::check_line_address): Adjust.
	(dwarf_decode_lines_1): Adjust.
	(dwarf_decode_lines): Adjust.
	(dwarf2_start_symtab): Adjust.
	(var_decode_location): Adjust.
	(new_symbol_full): Adjust.
	(dwarf2_const_value_data): Adjust.
	(dwarf2_const_value_attr): Adjust.
	(dwarf2_const_value): Adjust.
	(die_type): Adjust.
	(die_containing_type): Adjust.
	(build_error_marker_type): Adjust.
	(lookup_die_type): Adjust.
	(guess_full_die_structure_name): Adjust.
	(anonymous_struct_prefix): Adjust.
	(determine_prefix): Adjust.
	(dwarf2_name): Adjust.
	(follow_die_ref_or_sig): Adjust.
	(follow_die_offset): Adjust.
	(follow_die_ref): Adjust.
	(follow_die_sig_1): Adjust.
	(follow_die_sig): Adjust.
	(get_signatured_type): Adjust.
	(get_DW_AT_signature_type): Adjust.
	(decode_locdesc): Adjust.
	(dwarf_decode_macros): Adjust.
	(cu_debug_loc_section): Adjust.
	(fill_in_loclist_baton): Adjust.
	(dwarf2_symbol_mark_computed): Adjust.
	(init_one_comp_unit): Don't assign
	dwarf2_cu::dwarf2_per_objfile.
	(set_die_type): Adjust.

2018-01-07  Simon Marchi  <simon.marchi@ericsson.com>

	* dwarf2read.c (struct mapped_debug_names): Add constructor.
	<dwarf2_per_objfile>: New field.
	(dwarf2_per_objfile): Remove global.
	(get_dwarf2_per_objfile): New function.
	(set_dwarf2_per_objfile): New function.
	(dwarf2_build_psymtabs_hard): Change objfile parameter to
	dwarf2_per_objfile.
	(abbrev_table_read_table): Add dwarf2_per_objfile parameter.
	(read_abbrev_offset): Likewise.
	(read_indirect_string): Likewise.
	(read_indirect_line_string): Likewise.
	(read_indirect_string_at_offset): Likewise.
	(read_indirect_string_from_dwz): Likewise.
	(dwarf2_find_containing_comp_unit): Change objfile parameter to
	dwarf2_per_objfile.
	(age_cached_comp_units): Add dwarf2_per_objfile parameter.
	(create_all_comp_units): Change objfile parameter to
	dwarf2_per_objfile.
	(create_all_type_units): Likewise.
	(process_queue): Add dwarf2_per_objfile parameter.
	(read_and_check_comp_unit_head): Likewise.
	(lookup_dwo_unit_in_dwp): Likewise.
	(get_dwp_file): Likewise.
	(process_cu_includes): Likewise.
	(struct free_dwo_file_cleanup_data): New struct.
	(dwarf2_has_info): Use get_dwarf2_per_objfile and
	set_dwarf2_per_objfile.
	(dwarf2_get_dwz_file): Add dwarf2_per_objfile parameter.
	(dw2_do_instantiate_symtab): Get dwarf2_per_objfile from
	context, adjust calls.
	(dw2_instantiate_symtab): Likewise.
	(dw2_get_cutu): Add dwarf2_per_objfile parameter.
	(dw2_get_cu): Likewise.
	(create_cu_from_index_list): Change objfile parameter to
	dwarf2_per_objfile.
	(create_cus_from_index_list): Get dwarf2_per_objfile from
	context, adjust calls.
	(create_cus_from_index): Likewise.
	(create_signatured_type_table_from_index): Change objfile
	parameter to dwarf2_per_objfile.
	(create_signatured_type_table_from_debug_names): Change objfile
	parameter to dwarf2_per_objfile.
	(create_addrmap_from_index): Likewise.
	(create_addrmap_from_aranges): Likewise.
	(dwarf2_read_index): Use get_dwarf2_per_objfile, adjust calls.
	(dw2_setup): Remove.
	(dw2_get_file_names_reader): Get dwarf2_per_objfile from
	context.
	(dw2_find_last_source_symtab): Get dwarf2_per_objfile using
	get_dwarf2_per_objfile.
	(dw2_forget_cached_source_info): Likewise.
	(dw2_map_symtabs_matching_filename): Likewise.
	(struct dw2_symtab_iterator) <index>: Remove.
	<dwarf2_per_objfile>: New field.
	(dw2_symtab_iter_init): Replace index parameter with
	dwarf2_per_objfile.
	(dw2_symtab_iter_next): Use dwarf2_per_objfile from iter.
	(dw2_lookup_symbol): Use get_dwarf2_per_objfile and adjust.
	(dw2_print_stats): Likewise.
	(dw2_dump): Likewise.
	(dw2_expand_symtabs_for_function): Likewise.
	(dw2_expand_all_symtabs): Likewise.
	(dw2_expand_symtabs_with_fullname): Likewise.
	(dw2_expand_marked_cus): Replace index and objfile parameters
	with dwarf2_per_objfile.
	(dw_expand_symtabs_matching_file_matcher): Add
	dwarf2_per_objfile parameter and adjust calls.
	(dw2_expand_symtabs_matching): Use get_dwarf2_per_objfile and
	adjust calls.
	(dw2_find_pc_sect_compunit_symtab): Don't call dw2_setup.
	(dw2_map_symbol_filenames): Use get_dwarf2_per_objfile and
	adjust calls.
	(create_cus_from_debug_names_list): Replace objfile parameter
	with dwarf2_per_objfile and adjust calls.
	(create_cus_from_debug_names): Likewise.
	(dwarf2_read_debug_names): Likewise.
	(mapped_debug_names::namei_to_name): Adjust call.
	(dw2_debug_names_iterator::next): Likewise.
	(dw2_debug_names_iterator::find_vec_in_debug_names): Likewise.
	(dw2_debug_names_lookup_symbol): Use get_dwarf2_per_objfile.
	(dw2_debug_names_dump): Likewise.
	(dw2_debug_names_expand_symtabs_for_function): Likewise.
	(dw2_debug_names_expand_symtabs_matching): Likewise.
	(dwarf2_initialize_objfile): Likewise.
	(dwarf2_build_psymtabs): Likewise.
	(get_abbrev_section_for_cu): Get dwarf2_per_objfile from
	this_cu.
	(error_check_comp_unit_head): Add dwarf2_per_objfile parameter.
	(read_and_check_comp_unit_head): Likewise.
	(read_abbrev_offset): Likewise.
	(create_debug_type_hash_table): Likewise.
	(create_debug_types_hash_table): Likewise.
	(create_all_type_units): Replace objfile parameter with
	dwarf2_per_objfile.
	(add_type_unit): Add dwarf2_per_objfile parameter.
	(fill_in_sig_entry_from_dwo_entry): Replace objfile parameter
	with dwarf2_per_objfile.
	(lookup_dwo_signatured_type): Get dwarf2_per_objfile from cu.
	(lookup_dwp_signatured_type): Likewise.
	(lookup_signatured_type): Likewise.
	(read_cutu_die_from_dwo): Likewise.
	(init_tu_and_read_dwo_dies): Likewise.
	(init_cutu_and_read_dies): Likewise.
	(init_cutu_and_read_dies_no_follow): Likewise.
	(allocate_type_unit_groups_table): Add objfile parameter.
	(create_type_unit_group): Use dwarf2_per_objfile from cu.
	(get_type_unit_group): Likewise.
	(process_psymtab_comp_unit): Update call.
	(build_type_psymtabs_reader): Use dwarf2_per_objfile from cu.
	(build_type_psymtabs_1): Add dwarf2_per_objfile parameter.
	(print_tu_stats): Likewise.
	(build_type_psymtab_dependencies): Use dwarf2_per_objfile passed
	in void* parameter.
	(build_type_psymtabs): Change objfile parameter to
	dwarf2_per_objfile.
	(process_skeletonless_type_unit): Use dwarf2_per_objfile
	passed in void* parameter.
	(process_skeletonless_type_units): Change objfile parameter to
	dwarf2_per_objfile.
	(set_partial_user): Likewise.
	(dwarf2_build_psymtabs_hard): Likewise.
	(read_comp_units_from_section): Likewise.
	(create_all_comp_units): Likewise.
	(scan_partial_symbols): Update calls.
	(add_partial_symbol): Likewise.
	(dwarf2_read_symtab): Use get_dwarf2_per_objfile.
	(maybe_queue_comp_unit): Use dwarf2_read_symtab from cu.
	(process_queue): Add dwarf2_per_objfile parameter.
	(get_compunit_symtab): Use dwarf2_per_objfile from cu.
	(compute_compunit_symtab_includes): Likewise.
	(process_cu_includes): Add dwarf2_per_objfile parameter.
	(process_full_comp_unit): Use dwarf2_per_objfile from cu.
	(process_full_type_unit): Likewise.
	(process_imported_unit_die): Update call.
	(handle_DW_AT_stmt_list): Use dwarf2_per_objfile from cu.
	(read_file_scope): Likewise.
	(allocate_dwo_file_hash_table): Add objfile parameter.
	(lookup_dwo_file_slot): Add dwarf2_per_objfile parameter.
	(create_cus_hash_table): Likewise.
	(create_dwp_hash_table): Likewise.
	(create_dwo_unit_in_dwp_v1): Likewise.
	(create_dwp_v2_section): Likewise.
	(create_dwo_unit_in_dwp_v2): Likewise.
	(lookup_dwo_unit_in_dwp): Likewise.
	(try_open_dwop_file): Likewise.
	(open_dwo_file): Likewise. Use dwarf2_per_objfile from cu.
	(open_and_init_dwo_file): Use dwarf2_per_objfile from cu, update
	cleanup to include a reference to dwarf2_per_objfile.
	(open_dwp_file): Add dwarf2_per_objfile parameter.
	(open_and_init_dwp_file): Likewise.
	(get_dwp_file): Likewise.
	(lookup_dwo_cutu): Use dwarf2_per_objfile from cu.
	(queue_and_load_all_dwo_tus): Update call.
	(free_dwo_file_cleanup): Use dwarf2_per_objfile from cleanup
	data.
	(dwarf2_rnglists_process): Use dwarf2_per_objfile from cu.
	(dwarf2_ranges_process): Likewise.
	(dwarf2_get_pc_bounds): Likewise.
	(mark_common_block_symbol_computed): Likewise.
	(abbrev_table_read_table): Add dwarf2_per_objfile parameter.
	(dwarf2_read_abbrevs): Update call.
	(read_partial_die): Use dwarf2_per_objfile from cu.
	(find_partial_die): Likewise.
	(fixup_partial_die): Likewise.
	(read_attribute_value): Likewise.
	(read_indirect_string_at_offset_from): Add objfile parameter.
	(read_indirect_string_at_offset): Add dwarf2_per_objfile
	parameter.
	(read_indirect_string_from_dwz): Add objfile parameter.
	(read_indirect_string): Add objfile parameter.
	(read_addr_index_1): Add dwarf2_per_objfile parameter.
	(read_addr_index): Use dwarf2_per_objfile from cu.
	(dwarf2_read_addr_index): Use dwarf2_per_objfile from cu, don't
	call dw2_setup.
	(read_str_index): Use dwarf2_per_objfile from cu.
	(get_debug_line_section): Likewise.
	(read_formatted_entries): Add dwarf2_per_objfile parameter.
	(dwarf_decode_line_header): Use dwarf2_per_objfile from cu.
	(new_symbol_full): Use dwarf2_per_objfile from cu.
	(build_error_marker_type): Likewise.
	(lookup_die_type): Likewise.
	(determine_prefix): Likewise.
	(follow_die_offset): Likewise.
	(dwarf2_fetch_die_loc_sect_off): Use get_dwarf2_per_objfile.
	(dwarf2_fetch_constant_bytes): Don't call dw2_setup.
	(dwarf2_fetch_die_type_sect_off): Likewise.
	(dwarf2_get_die_type): Likewise.
	(follow_die_sig_1): Use dwarf2_per_objfile from cu.
	(get_signatured_type): Likewise.
	(get_DW_AT_signature_type): Likewise.
	(dwarf_decode_macro_bytes): Add dwarf2_per_objfile parameter.
	(dwarf_decode_macros): Use dwarf2_per_objfile from cu.
	(cu_debug_loc_section): Likewise.
	(fill_in_loclist_baton): Likewise.
	(dwarf2_symbol_mark_computed): Likewise.
	(dwarf2_find_containing_comp_unit): Change objfile parameter to
	dwarf2_per_objfile.
	(free_cached_comp_units): Use dwarf2_per_objfile passed in void*
	parameter.
	(age_cached_comp_units): Add dwarf2_per_objfile parameter.
	(free_one_cached_comp_unit): Use dwarf2_per_objfile from cu.
	(dwarf2_free_objfile): Use get_dwarf2_per_objfile.
	(set_die_type): Use dwarf2_free_objfile from cu.
	(get_die_type_at_offset): Likewise.
	(dwarf2_per_objfile_free): Don't assign global variable.
	(debug_names) <constructor>: Add dwarf2_per_objfile
	parameter, update m_debugstrlookup construction.
	(debug_names::debug_str_lookup): Add dwarf2_per_objfile
	parameter.
	<m_dwarf2_per_objfile>: New field.
	<lookup>: Use m_dwarf2_per_objfile.
	(check_dwarf64_offsets): Add dwarf2_per_objfile parameter.
	(psyms_seen_size): Likewise.
	(write_gdbindex): Replace objfile parameter with
	dwarf2_per_objfile.
	(write_debug_names): Likewise.
	(write_psymtabs_to_index): Likewise.
	(save_gdb_index_command): Use get_dwarf2_per_objfile, update
	calls.

2018-01-07  Simon Marchi  <simon.marchi@ericsson.com>

	* dwarf2read.c (struct dwarf2_cu) <objfile>: Remove.
	<dwarf2_per_objfile>: New field.
	(struct dwarf2_per_cu_data) <objfile>: Remove.
	<dwarf2_per_objfile>: New field.
	(create_cu_from_index_list): Assign dwarf2_per_objfile instead
	of objfile.
	(create_signatured_type_table_from_index): Likewise.
	(create_debug_type_hash_table): Likewise.
	(fill_in_sig_entry_from_dwo_entry): Likewise.
	(lookup_dwo_unit): Access objfile through dwarf2_per_objfile.
	(create_type_unit_group): Assign dwarf2_per_objfile instead of
	objfile.
	(create_partial_symtab): Access objfile through
	dwarf2_per_objfile.
	(process_psymtab_comp_unit_reader): Likewise.
	(read_comp_units_from_section): Likewise.
	(scan_partial_symbols): Likewise.
	(add_partial_symbol): Likewise.
	(add_partial_subprogram): Likewise.
	(peek_die_abbrev): Likewise.
	(fixup_go_packaging): Likewise.
	(process_full_comp_unit): Likewise.
	(process_full_type_unit): Likewise.
	(process_imported_unit_die): Likewise.
	(dwarf2_compute_name): Likewise.
	(dwarf2_physname): Likewise.
	(read_import_statement): Likewise.
	(create_cus_hash_table): Assign dwarf2_physname instead of
	objfile.
	(read_func_scope): Access objfile through dwarf2_per_objfile.
	(read_lexical_block_scope): Likewise.
	(read_call_site_scope): Likewise.
	(read_variable): Likewise.
	(dwarf2_rnglists_process): Likewise.
	(dwarf2_ranges_process): Likewise.
	(dwarf2_ranges_read): Likewise.
	(dwarf2_record_block_ranges): Likewise.
	(dwarf2_add_field): Likewise.
	(dwarf2_add_member_fn): Likewise.
	(read_structure_type): Likewise.
	(process_structure_scope): Likewise.
	(read_enumeration_type): Likewise.
	(read_array_type): Likewise.
	(read_common_block): Likewise.
	(read_namespace_type): Likewise.
	(read_namespace): Likewise.
	(read_module_type): Likewise.
	(read_tag_pointer_type): Likewise.
	(read_tag_ptr_to_member_type): Likewise.
	(read_tag_string_type): Likewise.
	(read_subroutine_type): Likewise.
	(read_typedef): Likewise.
	(read_base_type): Likewise.
	(attr_to_dynamic_prop): Likewise.
	(read_subrange_type): Likewise.
	(read_unspecified_type): Likewise.
	(load_partial_dies): Likewise.
	(read_partial_die): Likewise.
	(find_partial_die): Likewise.
	(guess_partial_die_structure_name): Likewise.
	(fixup_partial_die): Likewise.
	(read_attribute_value): Likewise.
	(read_addr_index_from_leb128): Likewise.
	(dwarf2_read_addr_index): Likewise.
	(dwarf2_string_attr): Likewise.
	(lnp_state_machine::check_line_address): Likewise.
	(dwarf_decode_lines_1): Likewise.
	(dwarf_decode_lines): Likewise.
	(dwarf2_start_symtab): Likewise.
	(var_decode_location): Likewise.
	(new_symbol_full): Likewise.
	(dwarf2_const_value_data): Likewise.
	(dwarf2_const_value_attr): Likewise.
	(dwarf2_const_value): Likewise.
	(die_type): Likewise.
	(die_containing_type): Likewise.
	(lookup_die_type): Likewise.
	(guess_full_die_structure_name): Likewise.
	(anonymous_struct_prefix): Likewise.
	(dwarf2_name): Likewise.
	(follow_die_ref_or_sig): Likewise.
	(follow_die_offset): Likewise.
	(follow_die_ref): Likewise.
	(dwarf2_fetch_die_loc_sect_off): Likewise.
	(dwarf2_fetch_constant_bytes): Likewise.
	(dwarf2_fetch_die_type_sect_off): Likewise.
	(dwarf2_get_die_type): Likewise.
	(follow_die_sig): Likewise.
	(decode_locdesc): Likewise.
	(dwarf2_per_cu_objfile): Likewise.
	(dwarf2_per_cu_text_offset): Likewise.
	(init_one_comp_unit): Assign dwarf2_per_objfile instead of
	objfile.
	(set_die_type): Access objfile through
	dwarf2_per_objfile.

2018-01-07  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (converted_character_d): Remove typedef.
	(DEF_VEC_O (converted_character_d)): Remove.
	(count_next_character): Use std::vector.
	(print_converted_chars_to_obstack): Likewise.
	(generic_printstr): Likewise.

2018-01-07  Simon Marchi  <simon.marchi@polymtl.ca>

	* xml-support.h (struct gdb_xml_value): Add constructor.
	<value>: Change type to unique_xmalloc_ptr.
	(gdb_xml_value_s): Remove typedef.
	(DEF_VEC_O (gdb_xml_value_s)): Remove.
	(gdb_xml_element_start_handler): Change parameter type to
	std::vector.
	(xml_find_attribute): Likewise.
	* xml-support.c (xml_find_attribute): Change parameter type to
	std::vector and adjust.
	(gdb_xml_values_cleanup): Remove.
	(gdb_xml_parser::start_element): Adjust to std::vector.
	(xinclude_start_include): Change paraeter type to std::vector
	and adjust.
	* btrace.c (check_xml_btrace_version): Likewise.
	(parse_xml_btrace_block): Likewise.
	(parse_xml_btrace_pt_config_cpu): Likewise.
	(parse_xml_btrace_pt): Likewise.
	(parse_xml_btrace_conf_bts): Likewise.
	(parse_xml_btrace_conf_pt): Likewise.
	* memory-map.c (memory_map_start_memory): Likewise.
	(memory_map_start_property): Likewise.
	* osdata.c (osdata_start_osdata): Likewise.
	(osdata_start_item): Likewise.
	(osdata_start_column): Likewise.
	* remote.c (start_thread): Likewise.
	* solib-aix.c (library_list_start_library): Likewise.
	(library_list_start_list): Likewise.
	* solib-svr4.c (library_list_start_library): Likewise.
	(svr4_library_list_start_list): Likewise.
	* solib-target.c (library_list_start_segment): Likewise.
	(library_list_start_section): Likewise.
	(library_list_start_library): Likewise.
	(library_list_start_list): Likewise.
	* tracepoint.c (traceframe_info_start_memory): Likewise.
	(traceframe_info_start_tvar): Likewise.
	* xml-syscall.c (syscall_start_syscall): Likewise.
	* xml-tdesc.c (tdesc_start_target): Likewise.
	(tdesc_start_feature): Likewise.
	(tdesc_start_reg): Likewise.
	(tdesc_start_union): Likewise.
	(tdesc_start_struct): Likewise.
	(tdesc_start_flags): Likewise.
	(tdesc_start_enum): Likewise.
	(tdesc_start_field): Likewise.
	(tdesc_start_enum_value): Likewise.
	(tdesc_start_vector): Likewise.

2018-01-07  Simon Marchi  <simon.marchi@polymtl.ca>

	* extension.h (struct xmethod_worker) <clone>: Remove.
	* python/py-xmethods.c (struct python_xmethod_worker) <clone>:
	Remove.
	(python_xmethod_worker::clone): Remove.
	* valops.c (find_overload_match): Use std::move instead of
	clone.

2018-01-07  Simon Marchi  <simon.marchi@polymtl.ca>

	* extension-priv.h (enum ext_lang_rc): Remove, move to extension.h.
	(struct extension_language_ops) <clone_xmethod_worker_data>: Remove.
	<free_xmethod_worker_data>: Remove.
	<get_matching_xmethod_workers>: Chance VEC to std::vector.
	<get_xmethod_arg_types>: Remove.
	<get_xmethod_result_type>: Remove.
	<invoke_xmethod>: Remove.
	* extension.c (new_xmethod_worker): Remove.
	(clone_xmethod_worker): Remove.
	(get_matching_xmethod_workers): Return void, pass std::vector by
	pointer.
	(get_xmethod_arg_types): Rename to...
	(xmethod_worker::get_arg_types): ... this, and adjust.
	(get_xmethod_result_type): Rename to...
	(xmethod_worker::get_result_type): ... this, and adjust.
	(invoke_xmethod): Remove.
	(free_xmethod_worker): Remove.
	(free_xmethod_worker_vec): Remove.
	* extension.h (enum ext_lang_rc): Move here from
	extension-priv.h.
	(struct xmethod_worker): Add constructor and destructor.
	<data>: Remove.
	<value>: Remove.
	<invoke, clone, do_get_result_type, do_get_arg_types>: New
	virtual pure methods.
	<get_arg_types, get_result_type>: New methods.
	(xmethod_worker_ptr): Remove typedef.
	(DEF_VEC_P (xmethod_worker_ptr)): Remove.
	(xmethod_worker_vec): Remove typedef.
	(xmethod_worker_up): New typedef.
	(invoke_xmethod): Remove.
	(clone_xmethod_worker): Remove.
	(free_xmethod_worker): Remove.
	(free_xmethod_worker_vec): Remove.
	(get_xmethod_arg_types): Remove.
	(get_xmethod_result_type): Remove.
	* valops.c (find_method_list): Use std::vector, don't use
	intermediate vector.
	(value_find_oload_method_list): Use std::vector.
	(find_overload_match): Use std::vector.
	(find_oload_champ): Use std::vector.
	* value.c (value_free): Use operator delete.
	(value_of_xmethod): Rename to...
	(value_from_xmethod): ... this.  Don't assign
	xmethod_worker::value, take rvalue-reference.
	(result_type_of_xmethod): Adjust.
	(call_xmethod): Adjust.
	* value.h: Include extension.h.
	(struct xmethod_worker): Don't forward-declare.
	(value_of_xmethod): Rename to...
	(value_from_xmethod): ... this, take rvalue-reference.
	* python/py-xmethods.c (struct gdbpy_worker_data): Rename to...
	(struct python_xmethod_worker): ... this, add constructor and
	destructor.
	<invoke, clone, do_get_arg_types, do_get_result_type>: Implement.
	(gdbpy_free_xmethod_worker_data): Rename to...
	(python_xmethod_worker::~python_xmethod_worker): ... this and
	adjust.
	(gdbpy_clone_xmethod_worker_data): Rename to...
	(python_xmethod_worker::clone): ... this and adjust.
	(gdbpy_get_matching_xmethod_workers): Use std::vector, don't use
	temporary vector.
	(gdbpy_get_xmethod_arg_types): Rename to...
	(python_xmethod_worker::do_get_arg_types): ... this and adjust.
	(gdbpy_get_xmethod_result_type): Rename to...
	(python_xmethod_worker::do_get_result_type): ... this and
	adjust.
	(gdbpy_invoke_xmethod): Rename to...
	(python_xmethod_worker::invoke): ... this and adjust.
	(new_python_xmethod_worker): Rename to...
	(python_xmethod_worker::python_xmethod_worker): ... this and
	adjust.
	* python/python-internal.h (gdbpy_clone_xmethod_worker_data):
	Remove.
	(gdbpy_free_xmethod_worker_data): Remove.
	(gdbpy_get_matching_xmethod_workers): Use std::vector.
	(gdbpy_get_xmethod_arg_types): Remove.
	(gdbpy_get_xmethod_result_type): Remove.
	(gdbpy_invoke_xmethod): Remove.
	* python/python.c (python_extension_ops): Remove obsolete
	callbacks.

2018-01-05  Pedro Alves  <palves@redhat.com>

	PR gdb/18653
	* common/signals-state-save-restore.c
	(save_original_signals_state): New parameter 'quiet'.  Warn if we
	find a custom handler preinstalled, instead of internal erroring.
	But only warn if !quiet.
	* common/signals-state-save-restore.h
	(save_original_signals_state): New parameter 'quiet'.
	* main.c (captured_main_1): Move save_original_signals_state call
	after option handling, and pass QUIET.

2018-01-05  Pedro Alves  <palves@redhat.com>

	* spu-tdep.c (spu_catch_start): Pass
	symbol_name_match_type::SEARCH_NAME to block_lookup_symbol.

2018-01-05  Pedro Alves  <palves@redhat.com>

	PR gdb/22670
	* ada-lang.c (literal_symbol_name_matcher): New function.
	(ada_get_symbol_name_matcher): Use it for
	symbol_name_match_type::SEARCH_NAME.
	* block.c (block_lookup_symbol): New parameter 'match_type'.  Pass
	it down instead of assuming symbol_name_match_type::FULL.
	* block.h (block_lookup_symbol): New parameter 'match_type'.
	* c-valprint.c (print_unpacked_pointer): Use
	lookup_symbol_search_name instead of lookup_symbol.
	* compile/compile-object-load.c (get_out_value_type): Pass down
	symbol_name_match_type::SEARCH_NAME.
	* cp-namespace.c (cp_basic_lookup_symbol): Pass down
	symbol_name_match_type::FULL.
	* cp-support.c (cp_get_symbol_name_matcher): Handle
	symbol_name_match_type::SEARCH_NAME.
	* infrun.c (insert_exception_resume_breakpoint): Use
	lookup_symbol_search_name.
	* p-valprint.c (pascal_val_print): Use lookup_symbol_search_name.
	* psymtab.c (maintenance_check_psymtabs): Use
	symbol_name_match_type::SEARCH_NAME and SYMBOL_SEARCH_NAME.
	* stack.c (print_frame_args): Use lookup_symbol_search_name and
	SYMBOL_SEARCH_NAME.
	* symtab.c (lookup_local_symbol): Don't demangle the lookup name
	if symbol_name_match_type::SEARCH_NAME.
	(lookup_symbol_in_language): Pass down
	symbol_name_match_type::FULL.
	(lookup_symbol_search_name): New.
	(lookup_language_this): Pass down
	symbol_name_match_type::SEARCH_NAME.
	(lookup_symbol_aux, lookup_local_symbol): New parameter
	'match_type'.  Pass it down.
	* symtab.h (symbol_name_match_type::SEARCH_NAME): New enumerator.
	(lookup_symbol_search_name): New declaration.
	(lookup_symbol_in_block): New 'match_type' parameter.

2018-01-05  Pedro Alves  <palves@redhat.com>

	PR gdb/22670
	* ada-lang.c (ada_lookup_encoded_symbol): Reimplement in terms of
	ada_lookup_symbol.
	(ada_lookup_symbol): Reimplement in terms of
	ada_lookup_symbol_list, bits factored out from
	ada_lookup_encoded_symbol.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

	* ada-exp.y (write_object_renaming): When subscripting an array
	using a symbol as the index, pass the block in call to
	ada_lookup_encoded_symbol when looking that symbol up.

2018-01-05  Jerome Guitton  <guitton@adacore.com>

	* ada-lang.c (ada_array_length): Use ada_index_type instead of
	TYPE_INDEX_TYPE.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_to_fixed_value_create): Add handling of
	the case where VALUE_LVAL (val0) is not lval_memory.

2018-01-05  Xavier Roirand  <roirand@adacore.com>

	* ada-valprint.c (print_optional_low_bound): Handle
	character-indexed array printing like boolean-indexed array
	printing.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

	* NEWS: Create a new section for the next release branch.
	Rename the section of the current branch, now that it has
	been cut.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

	GDB 8.1 branch created (5219ac6237c272b938c28517bf371429260c71e7):
	* version.in: Bump version to 8.1.50.DATE-git.

2018-01-03  Xavier Roirand  <roirand@adacore.com>

	* ada-lang.h (ada_exception_catchpoint_kind) <ada_catch_handlers>:
	Add field.
	* ada-lang.c (struct exception_support_info) <catch_handlers_sym>:
	Add field.
	(default_exception_support_info) <catch_handlers_sym>: Add field.
	(exception_support_info_fallback) <catch_handlers_sym>: Add field.
	(ada_exception_name_addr_1): Add "catch handlers" handling.
	(ada_exception_catchpoint_cond_string) <ex>: New parameter.
	Update all callers.
	(create_excep_cond_exprs) <ex>: Add parameter.
	(re_set_exception): Update create_excep_cond_exprs call.
	(print_it_exception, print_one_exception, print_mention_exception)
	(print_recreate_exception): Add "catch handler" handling.
	(allocate_location_catch_handlers, re_set_catch_handlers)
	(check_status_catch_handlers, print_it_catch_handlers)
	(print_one_catch_handlers, print_mention_catch_handlers)
	(print_recreate_catch_handlers): New function.
	(catch_handlers_breakpoint_ops): New variable.
	(catch_ada_exception_command_split) <is_catch_handlers_cmd>:
	Add parameter.  Add "catch handler" handling.
	(ada_exception_sym_name, ada_exception_breakpoint_ops):
	Add "catch handler" handling.
	(ada_exception_catchpoint_cond_string): Add "catch handler"
	handling.
	(create_ada_exception_catchpoint): Update create_excep_cond_exprs
	call.
	(catch_ada_handlers_command): New function.
	(initialize_ada_catchpoint_ops): Initialize "catch handlers"
	operations structure.
	(_initialize_ada_language): Add "catch handlers" command entry.
	* NEWS: Document "catch handlers" feature.

2018-01-02  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_value_slice_from_ptr): Take array stride into
	account when creating the array type of the slice.
	(ada_value_slice): Likewise.

2018-01-02  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_BYTE_STRIDE>:
	New enum value.
	(create_array_type_with_stride): Add byte_stride_prop parameter.
	* gdbtypes.c (create_array_type_with_stride) <byte_stride_prop>:
	New parameter.  Update all callers in this file.
	(array_type_has_dynamic_stride): New function.
	(is_dynamic_type_internal, resolve_dynamic_array): Add handling
	of arrays with dynamic byte strides.
	* dwarf2read.c (read_array_type): Add support for dynamic
	DW_AT_byte_stride attributes.

2018-01-02  Joel Brobecker  <brobecker@adacore.com>

	* dwarf2read.c (read_unspecified_type): Treat
	DW_TAG_enumeration_type DIEs from Ada units as stubs.

2018-01-01  Joel Brobecker  <brobecker@adacore.com>

	Update copyright year range in all GDB files.

2018-01-01  Joel Brobecker  <brobecker@adacore.com>

	* copyright.py (BY_HAND): Remove gdb/testsuite/gdb.base/step-line.inp
	and gdb/testsuite/gdb.base/step-line.c.

2018-01-01  Joel Brobecker  <brobecker@adacore.com>

	* copyright.py (main): Dump the contents of
	MULTIPLE_COPYRIGHT_HEADERS (separately) from BY_HAND,
	even if BY_HAND is empty.

2018-01-01  Joel Brobecker  <brobecker@adacore.com>

	* top.c (print_gdb_version): Update Copyright year in version
	message.

2018-01-01  Joel Brobecker  <brobecker@adacore.com>

	* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2017.

For older changes see ChangeLog-2017.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End:
